- 2018.01-2022.12 国家自然科学基金重大项目课题 高性能构件材料-结构一体化设计方法 51790171-FF218
- 2018.01-2018.12 XXX专项课题 运载火箭传力结构优化设计 XXXX-FF178
- 2018.01-2020.12 国家自然科学基金中巴合作重点项目 基于超弹性形状记忆合金和轻质点阵的冲击防护复合结构优化设计方法 5171101743-FF200
- 2018.01-2020.12 国家自然科学基金优秀青年科学基金 结构优化设计 11722219-FF130
- 2017.07-2020.12 国家重点研发计划课题 面向增材制造的产品创新设计技术 复杂载荷工况下增材制造整体结构拓扑优化技术 2017YFB1102800-FF315
- 2017.01-2019.12 XX基础科研项目 XX飞行器气动-控制-结构耦合分析与优化设计 XXXX-FF60
- 2017.01-2019.12 陕西省重点研发计划重点项目 高档数控机床功能部件结构的动力学响应拓扑优化设计与应用 2017ZDXM-GY-059-FF45
- 2017.01-2021.12 国家自然科学基金国际合作重点项目 面向增材制造的高性能整体结构构型设计理论与方法 11620101002-FF240
- 2016.10-2016.12 XXXX 运载火箭-飞行器异型舱段结构复算 XXXX-FF8
- 2016.07-2017.05 XXXX研究项目 XX-XX一体化优化设计技术 XXXX-FF40
- 2016.07-2017.03 XXXX十三五预研项目 XX飞行器热结构优化设计 XXXX-FF50
- 2015.07-2016.06 863-XXX 某型在轨平台的结构样机研制 XXXX-FF38
- 2015.01-2015.12 XXXX 面向3D打印的飞行器翼面结构优化设计 XXXX-FF54
- 2015.01-2019.12 国家自然科学基金重点基金项目 结构拓扑优化的工程特征设计理论与方法研究 11432011-FF330
- 2014.020175-2015.12 XXXX 某型运载火箭结构动力学性能优化设计技术 XXXX-FF30
- 2014.05-2015.12 XXXX 某型飞行器全弹结构拓扑优化设计 XXXX-FF25
- 2014.01-2015.12 陕西省科学技术研究发展计划项目 飞行器整体式结构构型优化设计技术 2014KJXX-37-FF10
- 2014.01-2015.11 中央高校基本科研业务项目 结构优化设计3102014JC02020505-FF20
- 2013.01-2015.12 973项目子课题 结构化超轻多孔材料的多功能化设计基础 2011CB610304-FF72
- 2012.07-2014.06 西北工业大学基础研究基金 快速原型的热结构耦合拓扑优化设计方法研究 NPU-FFR-JC20120229-FF15
- 2012.01-2015.12 国家自然科学基金面上基金项目 快速铸造原型内腔设计机理及其拓扑优化 11172236-FF68
- 2011.09-2012.11 XXXX 某型运载火箭结构轻量化设计研究 XXXX-FF29
- 2011.07-2012.11 XXXX 某型飞机结构轻量化设计研究 XXXX-FF31
- 2011.01-2013.12 国家自然科学基金青年基金项目 整体式结构系统的协同布局优化设计技术研究 11002113-FF24
- 2010.01-2011.12 西北工业大学基础研究基金 整体式结构系统协同拓扑优化设计技术 NPU-FFR-JC201009-FF8
- 2009.03-2011.12 高档数控机床与基础制造装备科技重大专项子课题 面向快速精铸的结构优化设计与精度控制软件 2009ZX04014-75-FF48
- 2017年度中国航空学会青年科技奖
飞行器结构设计 - 2016年度EDP Science杰出贡献奖
International Journal for Simulation and Multidisciplinary Design Optimization - 2016年度钱令希计算力学青年学者奖
计算固体力学与结构优化 - 2015年度国家自然科学二等奖
机械结构系统的整体式构型设计理论与方法研究 - 2014年度中日韩机械结构系统优化青年科学家
Topology Optimization of Assembled Aircraft Structure with Joint Load Constraints - 2014年度陕西省科技新星称号
飞行器整体式结构构型优化设计技术 - 2012年度陕西省科学技术一等奖
复杂薄壁结构整体设计与切削制造的优化理论与方法 - 2012年度陕西省高等学校科学技术一等奖
整体式结构系统布局与形状优化设计方法研究 - 2011年国防科技鉴定 国际先进水平
航空发动机XXXX性能优化设计技术与应用 - 2009年度陕西省科学技术二等奖
2009年度陕西省高等学校科学技术一等奖
结构轻量化设计的创新构型优化方法研究 - 2008年度国家留学基金委优秀留学生奖
多组件结构系统布局优化设计研究 - 2007年度法国CADLM年轻优化设计人才奖
CADLM Young Researcher Prize 2007: Intelligent Optimal Design
基于形状与拓扑优化设计的组件与结构布局设计技术研究
Simultaneous Design of Components Layout and Supporting Structures Using Coupled Shape and Topology Optimization - 2007年度ISSMO/Springer优秀论文提名奖
Candidate of ISSMO/Springer Prize 2007
复杂多组件结构系统优化设计
Optimal Design of Complex Multi-component Layout
- Zhu J.H., Integrated Layout and Structural Topology Optimization Design of Multi-component Systems. VDM Verlag Dr. Müller, ISBN-10: 3639346513 ISBN-13: 978-3639346510
- Zhang W.H., Zhu J.H., Gao Tong, Topology Optimization in Engineering Structure Design. ISTE Press & ELSEVIER. ISBN: 978-1785482243
GSC:http://scholar.google.com.hk/citations?user=3K-zt_oAAAAJ&hl=zh-CN
RID:http://www.researcherid.com/rid/J-7366-2012
ORCID:http://orcid.org/0000-0001-8884-0298
SCI & EI
- Zhang W.H.*, Xu Z., Zhou Y., Zhu J.H., Multiscale topology optimization using feature-driven method. Chinese Journal of Aeronautics. 2019 (SCI & EI)
- Cao Y.F., Gu X.J.*, Zhu J.H.*, Zhang W.H., Precise output loads control of load-diffusion components with topology optimization. Chinese Journal of Aeronautics. 2019 (SCI & EI)
- Xu Y.J.*, Wang J.*, Zhang W.H., Wang S., Zhu J.H., The compressive behavior and energy absorption of polymeric lattice structures made by additive manufacturing. Frontiers of Mechanical Engineering. 2019 (SCI & EI)
- Liu H.*, Cai J., Zhu J.H., Hot Corrosion Behavior of BaLa2Ti3O10 Thermal Barrier Ceramics in V2O5 and Na2SO4 + V2O5 Molten Salts. Coatings. 2019 (SCI & EI)
- Shi Z., Gao F.*, Xu J., Zhu J.H., Zhang Y., Gao T., Qin M., Reece M., Yan H. Two–step processing of thermoelectric (Ca0.9Ag0.1)3Co4O9/nano–sized Ag composites with high ZT. Journal of the European Ceramic Society 2019, 39: 3088-3093 (SCI & EI)
- Zhou Y., Zhang W.H.*, Zhu J.H., Concurrent shape and topology optimization involving design‐dependent pressure loads using implicit B‐spline curves. International Journal for Numerical Methods in Engineering. 2019 (SCI & EI)
- Zhang Y.H, You Y.J., Moumni Z,. Anlas G., Zhu J.H., Zhang W.H., Stored-energy-based fatigue criterion for shape memory alloys. Smart Materials and Structures. 2019 (SCI & EI)
- Hou J., Gu X.J.*, Zhu J.H, Wang J., Zhang W.H., Topology optimization of joint load control with geometrical nonlinearity. Chinese Journal of Aeronautics. 2019 DOI: 10.1016/j.cja.2019.01.024 (SCI & EI)
- Meng L., Zhang W.H.*, Quan D.L., Shi G.H., Tang L., Hou Y.L., Breitkopf P., Zhu J.H., Gao T.*, From topology optimization design to additive manufacturing: Today’s success and Tomorrow’s roadmap. Archives of Computational Methods in Engineering. 2019 (SCI & EI)
- Zhang Y.H.*, Moumni Z., You Y.J., Zhu J.H., Zhang W.H., Energy-based analysis of temperature oscillation at the shakedown state in shape memory alloys. Continuum Mechanics and Thermodynamics. 2019 (SCI & EI)
- Wang J., Zhang W.H.*, Zhu J.H.*, Xu Y.J., Gu X.J., Moumni Z., Finite element simulation of thermomechanical training on functional stability of shape memory alloy wave spring actuator. Journal of Intelligent Material Systems and Structures. 2019 (SCI & EI)
- Li Y.*, Zhu J.H.*, Wang F.W., Zhang W.H., Sigmund O., Shape preserving design of geometrically nonlinear structures using topology optimization. Structural and Multidisciplinary Optimization. 2019 (SCI & EI)
- Zhang Y.H., Moumni Z.*, You Y.J., Zhang W.H.*, Zhu J.H., Anlas G., Multiscale TRIP-based investigation of low-cycle fatigue of polycristalline Ni-Ti shape memory alloys. International Journal of Plasticity. 2019 (SCI & EI)
- Liu T., Zhu J.H.*, Zhang W.H.*, Zhao H., Kong J., Gao T., Integrated layout and topology optimization design of multi-component systems under harmonic base acceleration excitations. Structural and Multidisciplinary Optimization. 2019 DOI: 10.1007/s00158-019-02200-2 (SCI & EI)
- Zhang Y.H.*, Li W.C., Moumni Z., Zhu J.H., Zhang W.H.*., Zhong S.Y. Degradation of the recoverable strain during stress controlled full transformation cycling in NiTi shape memory alloys. Scripta Materialia. 2019 (SCI & EI)
- Cai J., Liu H., Zhu J.H., Wang Z.*, Effect of nanocrystalline process on microstructure of Zr-based metallic glass. Materials Research Express. 2019, 6: 025044 (SCI & EI)
- Shi Z., Xu J., Zhu J.H., Zhang Y., Gao T., Qin M., Sun H., Dong G., Gao F.*. Effect of platelet template seeds on microstructure and thermoelectric properties of Ca3Co4O9 ceramics. Ceramics International. 2019, 45(2): 1977-1983 (SCI & EI)
- Xu Y.J., Zhu J.H.*, Wu Z, Cao Y.F., Zhao Y.B., Zhang W.H.*. A review on the design of laminated composite structures: constant and variable stiffness design and topology optimization. Advanced Composites and Hybrid Materials. 2019, 1(3): 460-477 (SCI & EI)
- Zhu J.H.*, Zhao Y.B., Zhang W.H.*, Gu X.J., Gao T., Kong J., Shi G.H., Xu Y.J., Quan D.L., Bio-Inspired Feature-Driven Topology Optimization for Rudder Structure Design, Engineered Science. 2019 (SCI & EI)
- Liu T., Guessasma S.*, Zhu J.H.*, Zhang W.H.*, Belhabib S. Functionally graded materials from topology optimisation and stereolithography. European Polymer Journal. 2018, 108: 199-211 (SCI & EI)
- Wang C., Zhu J.H.*, Zhang W.H., Li S.Y., Kong J. Concurrent topology optimization design of structures and non-uniform parameterized lattice microstructures. Structural and Multidisciplinary Optimization. 2018, 58(1):35-50 (SCI & EI)
- Zhang Y.H.*, Moumni Z., Zhu J.H., Zhang W.H.. Effect of the amplitude of the training stress on the fatigue lifetime of NiTi Shape Memory Alloys. Scripta Materialia. 2018, 149:66-69 (SCI & EI)
- Yang K.K., Zhu J.H.*, Wang C., Jia D.S., Song L.L., Zhang W.H.*, Experimental Validation of 3D Printed Material Behaviors and their Influence on the Structural Topology Design. Computational Mechanics. 2018, 61(5): 581-598 (SCI & EI)
- Yang K.K., Zhu J.H.*, Wu M.Q., Zhang W.H., Integrated optimization of actuators and structural topology of piezoelectric composite structures for static shape control. Computer Methods in Applied Mechanics and Engineering. 2018, 334: 440-469 (SCI & EI)
- Li Y., Zhu J.H.*, Zhang W.H., Wang L., Structural Topology Optimization for Directional Deformation Behavior Design with the Orthotropic Artificial Weak Element Method, Structural and Multidisciplinary Optimization. 2018, 57(3): 1251-1266 (SCI & EI)
- Zhu J.H.*, He F., Liu T., Zhang W.H., Structural topology optimization under harmonic base acceleration excitations, Structural and Multidisciplinary Optimization. 2018, 57(3): 1061-1078 (SCI & EI)
- Liu H.*, Cai J., Zhu J.H., CMAS (CaO-MgO-Al2O3-SiO2) resistance of Y2O3-stabilized ZrO2 thermal barrier coatings with Pt layers. Ceramics International. 2018, 44(1): 452-458 (SCI & EI)
-
Guessasma S.*, Liu T., Belhabib S., Zhu J.H., Zhang W.H., Nouri H. Analysis of microstructure and mechanical performance of polymeric cellular structures designed using stereolithography. European Polymer Journal, 2018, 98: 72-82. (SCI & EI)
- Liu T., Guessasma S.*, Zhu J.H.*, Zhang W.H., Nouri H., Belhabib S. Microstructural defects induced by stereolithography and related compressive behaviour of polymers. Journal of Materials Processing Technology. 2018, 251: 37-46. (SCI & EI)
- Hou J., Zhu J.H.*, He F., Zhang W.H., Topology Optimization of Stiffeners Layout with Constraints on the Multi-Fastener Joint Loads. Chinese Journal of Aeronautics. 2017, 30(4): 1441-1450 (SCI & EI)
- Zhang W.H.*, Zhou Y., Zhu J.H., A comprehensive study of feature definitions with solids and voids for topology optimization. Computer Methods in Applied Mechanics and Engineering. 2017, 325: 289-313 (SCI & EI)
- Sun M., Xie Y.B.*, Zhu J.H., Li J., Eijkel J., Improving the resolution of 3D-Printed molds for microfluidics by iterative casting-shrinkage cycles. Analytical Chemistry. 2017, 89(4): 2227-2231 (SCI & EI)
- Guessasma S.*, Zhang W.H., Zhu J.H., Local mechanical behaviour mapping of a biopolymer blend using nanoindentation, finite element computation and simplex optimisation strategy. Journal of Applied Polymer Science. 2017, 134(24): (SCI & EI)
- Zhu J.H.*, Guo W.J., Zhang W.H., Liu T., Integrated layout and topology optimization design of multi-frame and multi-component fuselage structure systems. Structural and Multidisciplinary Optimization. 2017, 56(1): 21-45 (SCI & EI)
- Zhang Y.H., You Y.J., Moumni Z.*, Anlas G., Zhu J.H.*, Zhang W.H.. Experimental and theoretical investigation of the frequency effect on low cycle fatigue of shape memory alloys. International Journal of Plasticity, 2017 DOI: 10.1016/j.ijplas.2016.11.012 (SCI & EI)
- Wang D.*, Zhang W.H., Zhu J.H., A moving bounds strategy for the parameterization of geometric design variables in the simultaneous shape optimization of curved shell structures and openings. Finite Elements in Analysis and Design, 2016, 120: 80-91 (SCI 000382296400006 & EI 20163102657541)
- Hou J., Zhu J.H.*, Li Q., On the topology optimization of elastic supporting structures under thermo-mechanical loads. International Journal of Aerospace Engineering 2016, 2016: 7372603 (SCI & EI 20163202703214)
- Zhou Y., Zhang W.H.*, Zhu J.H., Xu Z., Feature-driven topology optimization method with signed distance function. Computer Methods in Applied Mechanics and Engineering 2016, 310: 1-32 (SCI 000384859400001 & EI 20162902621489)
- Zhang Y.H., Zhu J.H.*, Moumni Z.*, Van herpen A., Zhang W.H., Energy-based fatigue model for shape memory alloys including thermomechanical coupling. Smart Materials and Structures 2016, 25: 035042 (SCI 000372338600043 & EI 20161002056748)
- Meng L., Zhang W.H., Zhu J.H.*, Xu Z., Cai S.Y., Shape optimization of axisymmetric solids with the finite cell method using a fixed grid. Acta Mechanica Sinica. 2016, 32(3): 510-524 (SCI 000379181600015 & EI 20160701911019)
- Zhu J.H.*, Li Y., Zhang W.H., Hou J., Shape Preserving Design with Structural Topology Optimization. Structural and Multidisciplinary Optimization. 2016, 53(4): 893-906 (SCI 000373023800016 & EI 20154901641698)
- Zhu J.H.*, Zhang W.H., Xia L.*, Topology Optimization in Aircraft and Aerospace Structures Design. Archives of Computational Methods in Engineering. 2016, 23(4), 595-622 (SCI 000387402200002 & EI)
- Zhu J.H.*, Yan J., Jiang C., Beckers P., Dahan M., Shape and Topology Optimization for Complicated Engineering Structures. Mathematical Problems in Engineering. 2015, 501, 723897 (SCI 000364681700001 & EI 20154701591498)
- Gao H.H., Zhu J.H.*, Zhang W.H., Zhou Y., An Improved Adaptive Constraint Aggregation for Integrated Layout and Topology Optimization. Computer Methods in Applied Mechanics and Engineering. 2015, 289: 387-408 (SCI 000352082400018 & EI 20151100638092)
- Zhu J.H.*, Gao H.H., Zhang W.H., Zhou Y., A Multi-point Constraints based Integrated Layout and Topology Optimization Design of Multi-component Systems. Structural and Multidisciplinary Optimization. 2014, 51: 397-407 (SCI 000350897000009 & EI 20143600017626)
- Meng L., Zhang W.H.*, Zhu J.H., Xia L., A biarc-based shape optimization approach to reduce stress concentration effects. Acta Mechanica Sinica. 2014, 30: 370-382 (SCI 000338236800011 & EI 20142717887512)
- Cai S.Y., Zhang W.H.*, Zhu J.H.*, Gao T, Stress constrained shape and topology optimization with fixed mesh: A B-spline finite cell method combined with level set function, Computer Methods in Applied Mechanics and Engineering. 2014, 278: 361-387 (SCI 000340301200018 & EI 201426001592)
- Zhang W.H.*, Zhang Z.D., Zhu J.H., Gao T., Structural topology optimization: extensibility and attainability. SCIENCE CHINA Technological Sciences. 2014, 57(7): 1310-1321 (SCI 000338641100005 & EI 20142817928948)
- Zhu J.H.*, Hou J., Zhang W.H., Li Y., Structural Topology Optimization with Constraints on Multi-fastener Joint Loads. Structural and Multidisciplinary Optimization. 2014, 50(4): 561-571 (SCI 000342208100003 & EI 20143600017926)
- Xia L., Zhu J.H., Zhang W.H.*, Breitkopf P., An implicit model for the integrated optimization of component layout and structure topology. Computer Methods in Applied Mechanics and Engineering. 2013, 257: 87-102 (SCI 000318579900007 & EI 20131016084026)
- Zhu J.H.*, Gu X.J., Zhang W.H., Structural design of aircraft skin stretch-forming die using topology optimization. Journal of Computational and Applied Mathematics. 2013, 246: 278-288 (SCI 000316514500029 & EI 20151500733437)
- Zhang J., Zhang W.H.*, Zhu J.H., Integrated layout design of multi-component systems using XFEM and analytical sensitivity analysis. Computer Methods in Applied Mechanics and Engineering. 2012, 245-246: 75-89 (SCI 000311654600006 & EI 20124015536525)
- Xia L., Zhu J.H., Zhang W.H.*, Sensitivity analysis with the modified Heaviside function for the optimal layout design of multi-component systems. Computer Methods in Applied Mechanics and Engineering. 2012, 241-244: 142–154 (SCI 000308782100010 & EI 20123515382617)
- Zhang Q., Zhang W.H.*, Zhu J.H., Layout optimization of multi-component structures under static loads and random excitations. Engineering Structures. 2012, 43: 120-128 (SCI 000307146100011 & EI 20122915264538)
- Zhu J.H.*, Zhang W.H., Xia L., Optimal packing configuration design with Finite-circle Method. Journal of Intelligent and Robotic Systems. 2012, 67(3-4): 185-199 (SCI 000307716700002 & EI 20123515372420)
- Xia L., Zhu J.H., Zhang W.H.*, A superelement formulation for the efficient layout design of complex multi-component system. Structural and Multidisciplinary Optimization. 2012, 45(5): 643-655 (SCI 000303053500002 & EI 20122215064958)
- Gu X.J., Zhu J.H., Zhang W.H.*, The lattice structure configuration design for stereolithography investment casting pattern using topology optimization. Rapid Prototyping Journal. 2012, 18(5): 353-361 (SCI 000308835800003 & EI 20123115288826)
- Zhang W.H.*, Xia L., Zhu J.H., Zhang Q., Some recent advances in the integrated layout design of multicomponent systems. ASME Journal of Mechanical Design. 2011, 133(10): 182-196 (SCI 000296506100019 & EI 20114514498197)
- Zhang J., Zhang W.H.*, Zhu J.H., An extended stress-based method for orientation angle optimization of laminated composite structures. Acta Mechanica Sinica. 2011, 27(8): 977-985 (SCI 000298387200014 & EI 20120314680662)
- Zhu J.H.*, Zhang W.H., Integrated layout design of supports and structures. Computer Methods in Applied Mechanics and Engineering. 2010, 199(9-12): 557–569 (SCI 000274572600012 & EI 20100212618616)
- Zhu J.H.*, Beckers P. Zhang W.H., On the multi-component layout design with inertial force. Journal of Computational and Applied Mathematics. 2010, 234(7): 2222-2230 (SCI&ISTP 000279071000023 & EI 20103213132346)
- Wang D., Zhang W.H.*, Wang Z.P., Zhu J.H., Shape optimization of 3D curved slots and its application to the squirrel-cage elastic support design. Science China Physics, Mechanics and Astronomy 2010, 53 (10), 1895-1900 (SCI 000281860600020 & EI 20104213313016)
- Zhu J.H., Zhang W.H.*, Beckers P., Integrated layout design of the multi-component system. International Journal for Numerical Methods in Engineering. 2009,78(6): 631-651 (SCI 000265648700001 & EI 20092012078557)
- Zhu J.H.*, Zhang W.H., Beckers P., Simultaneous design of components layout and supporting structures using coupled shape and topology optimization. Structural and Multidisciplinary Optimization 2008,36(1): 29-41(SCI 000256087600004 & EI 20082211290318)
- Gao T., Zhang W.H.*, Zhu J.H., Topology optimization of heat conduction problem involving design-dependent heat load effect. Finite Elements in Analysis and Design. 2008, 44(14): 805-813 (SCI 000259173900001 & EI 20083811558225)
- Zhu J.H., Zhang W.H.*, Qiu K.P., Bi-directional evolutionary topology optimization using element replaceable method. Computational Mechanics. 2007, 40(1): 97-109 (SCI 000245293500009 & EI 20072010599638)
- Zhu J.H.*, Zhang W.H., Maximization of structural natural frequency with optimal support layout.Structural Multidisciplinary Optimization 2006, 31(6): 462-469 (SCI 000242613000005 & EI 20063810125466)
EI
- 侯杰, 朱继宏*, 王创, 王杰, 张卫红. 考虑机械连接载荷和疲劳性能的装配结构拓扑优化设计方法, 科学通报 2018 DOI: 10.1360/N972018-00788 (EI)
- 朱继宏*, 赵华, 刘涛, 张卫红. 简谐力激励下多组件结构系统的整体优化, 航空学报, 2018, 39: 221575 (EI)
- 吴曼乔, 朱继宏*, 杨开科, 张卫红, 面向压电智能结构精确变形的协同优化设计方法, 力学学报, 2017, 49(2): 380-389 (EI)
- 朱继宏*, 郭文杰, 张卫红, 何飞, 多组件结构系统布局优化中处理组件干涉约束的罚函数方法, 航空学报, 2016, 37(12): 3721-3733 (EI)
- 张卫红*, 郭文杰, 朱继宏, 部件级多组件结构系统的整体式拓扑布局优化, 航空学报, 2015, 36(8): 2662-2669 (EI 20153801295295)
- 朱继宏*, 李昱, 张卫红, 侯杰, 考虑多点保形的结构拓扑优化设计方法, 航空学报, 2015, 36(2): 518-526 (EI 20152100877502)
- Zhu J.H.*, Hou J., Gao H.H., The Affection of Fasteners Load Constraint in Topology Optimization. Applied Mechanics and Materials, 2014, 483: 514-517 (EI 20140317210811 & ISTP 000335714400102)
- Zhu J.H.*, Gao H.H., Hou J., Topology Optimization for Eigenvalue Problems in Aerospace Structure Design with Rigid Links. Applied Mechanics and Materials, 2014, 483: 510-513 (EI 20140317210810 & ISTP 000335714400101)
- Zhang Y.H., Zhu J.H.*, Li J.S., Structural Optimization Design of an Aircraft Metal-composite Wing. Applied Mechanics and Materials, 2013, 341-342: 824-828 (EI 20133516682323)
- Li Q., Zhu J.H.*, Zhang Y.H., The Topology optimization of ceramic-resin composite structure under thermal and mechanical loads. Applied Mechanics and Materials, 2013, 341-342: 888-892 (EI 20133516682238)
- 刘虎, 张卫红*, 朱继宏, 简谐力激励下结构拓扑优化与频率影响分析, 力学学报, 2013, 45(4): 588-597 (EI 20133416650806)
- 王振培*, 王丹, 朱继宏, 张卫红, 叶片参数化有限元建模与罩量优化设计, 航空动力学报, 2011, 26(11): 2450-2458 (EI 20115214639117)
- Zhu J.H., Wang H., Zhang W.H.*, Aircraft skin stretch-forming die light-weight design using topology optimization. Material Science Forum 2011, 697-698: 600-603 (EI 20114214429300 & ISTP 000303179900124)
- Gu X.J., Zhu J.H.*, Zhang W.H., The topology optimization design for the stereolithography based investment casting pattern. Material Science Forum 2011, 697-698: 604-607 (EI 20114214429301 & ISTP 000303179900125)
- Xia L., Zhu J.H.*, Zhang W.H., Integrated optimal design of complex multi-component system in three-dimension. Material Science Forum 2011, 697-698: 608-613 (EI 20114214429302 & ISTP 000303179900126)
- Wang D., Zhang W.H.*, Zhu J.H., Buckling optimization of perforated curved shells. Material Science Forum 2011, 697-698: 614-617 (EI 20114214429303 & ISTP 000303179900127)
- Yang J.G., Zhang W.H.*, Zhu J.H., Optimal design of aero-engine stator structure with combined shape and topology optimization method. Material Science Forum 2011, 697-698: 623-626 (EI 20114214429305 & ISTP 000303179900129)
- Zhu J.H.*, Li J.S., Gu X.J., A Modeling Module for Stereolithography Based Investment Casting Resin Model, The International Workshop on Electrical Engineering and Automation Control EEAC 2011, Zhenzhou, China (EI 20114014387104)
- 夏凉, 朱继宏, 张卫红*, 提高组件系统布局协同优化设计效率的新策略, 机械工程学报 2011, 47(5):135-142 (EI 20114114415287)
- Zhang Q., Zhang W.H.*, Zhu J.H., Yang J.G., Structure topology optimization under static and dynamic loads, 2010 International Conference on Mechanic Automation and Control Engineering, MACE2010, Wuhan, China (EI 20103513200890)
- Zhu J.H.*, Zhang W.H., Gu X.J., On the Topology Optimization Design for the Stereolithography based Investment Casting Model. Advanced Materials Research. 2010, 139-141: 1464-1467 (EI 20110113545993 & ISTP 000290199900326)
- Tang X.G., Zhang W.H.*, Zhu J.H., Multidisciplinary optimization of airborne radome using genetic algorithm. Artificial Intelligence and Computational Intelligence Proceedings AICI 2009, 5855: 150-158 (EI 20095112549829 & ISTP 000276635400017)
- 张 桥, 张卫红*, 朱继宏, 动力响应约束下的结构拓扑优化设计, 机械工程学报 2010,46(15): 45-51 (EI 20103613222402)
- 张卫红*, 杨军刚, 朱继宏, 压力载荷下的结构拓扑-形状协同优化, 航空学报 2009, 30(12): 2335-2341 (EI 20100312641123)
- 高彤, 张卫红*, 朱继宏, 惯性载荷作用下结构拓扑优化, 力学学报 2009 41(4): 530-541 (EI 20093312251333)
- 高彤*, 张卫红, 朱继宏, 循环对称结构静力学渐进拓扑优化设计, 机械工程学报 2008, 44(3): 166-173 (EI 20081611207026)
- 朱继宏*, 张卫红, 邱克鹏, 结构动力学拓扑优化局部模态现象研究, 航空学报 2006, 27(4): 619-623 (EI 070310367729)
- 张丹, 张卫红*, 朱继宏, 一种求解水平连铸中瞬态界面换热系数的新方法, 特种铸造及有色合金 2006, 26(3): 147-149 (EI 2006189857327)
期刊
- 朱继宏, 材料-结构-工艺一体化优化设计: 破解构件高性能轻量化难题, 航空制造技术(人物专访), 2018, 10
- 曹吟峰, 朱继宏*, 郭文杰, 李昱, 张卫红, 输出载荷精确控制的结构拓扑优化设计方法, 中国科学, 2017, doi/10.1360/SSPMA2016-00526
- 朱继宏, 何飞, 张卫红, 面向增材制造的飞行器结构优化设计关键问题, 航空制造技术, 2017, 524 (5) :16-21 (专稿)
- 朱继宏, 王林, 李昱, 张卫红, 基于多点自由度约束的方向性保形拓扑优化设计方法, 应用数学和力学, 2016, 37(10): 999-1012
- Zhu J.H., Yang K.K., Zhang W.H., Backbone Cup – A Structure Design Competition Based on Topology Optimization and 3D Printing, International Journal for Simulation and Multidisciplinary Design Optimization, 2016, 7
- 朱继宏, 高欢欢, 张卫红, 周莹, 航天器整体式多组件结构拓扑优化设计与应用, 航空制造技术, 2014(专稿), 14: 26-29
- Zhu J.H., Zhang W.H., Structural optimization in ESAC: annals 2011, International Journal for Simulation and Multidisciplinary Design Optimization, 2014, 5
- Gao H.H., Zhu J.H., Zhang W.H., A multi-point constraints based layout design of multi-component systems, International Journal for Simulation and Multidisciplinary Design Optimization, 2014, 5
- Zhu J.H., Li Q., Zhang W.H., The periodic resin configuration design for ceramic-resin composite structure using topology optimization, International Journal for Simulation and Multidisciplinary Design Optimization, 2014, 5
- 朱继宏, 张卫红, 王丹, 航空发动机柔性部件结构的热力耦合优化设计技术, 航空制造技术, 2013(专稿), 9: 26-31
- 甘学东, 张亚辉, 朱继宏, 常楠, 飞机金属-复合材料副翼结构优化技术, 机械制造, 2013, 51(11): 5-7
- 杨军, 张亚辉, 朱继宏, 常楠, 飞机复合材料蒙皮的优化设计, 机械制造, 2013, 51(11): 44-46
- 朱继宏, 李军朔, 张卫红, 现代形状优化技术在航空发动机零部件设计中的应用, 航空制造技术, 2012(专稿), 23/24: 30-35
- 王浩, 张卫红, 朱继宏, 飞机蒙皮拉形模拓扑优化设计, 机械设计与制造, 2012, 1: 7-9
- 张卫红, 夏凉, 朱继宏, 飞行器结构系统协同布局优化设计技术, 航空制造技术, 2010, 24: 32-37
- Zhu J.H., Zhang W.H., Bassir D.H., Validity improvement of evolutionary topology optimization procedure with element replaceable. International Journal for Simulation and Multidisciplinary Design Optimization 2009, 3(2): 347-355
- Zhu J.H., Zhang W.H., Beckers P., Multi-component layout design with coupled shape and topology optimization. International Journal of Simulation and Multidisciplinary Design Optimization. 2008, 2(3): 167-176
- Qiu K.P., Zhang W.H., Zhu J.H., Bending and dynamic analyses of sandwich panels considering the size effect of sandwich core. International Journal of Simulation and Multidisciplinary Design Optimization 2009, 3(3): 370-383
- Zhu J.H., Zhang W.H., Qiu K.P., Design of structural supports layout using topology optimization.HERMIS Int. Journal 2006, 6: 114-121
- 朱继宏, 张卫红, 田军, 基于连续密度变量的结构支撑布局优化设计, 机械科学与技术 2004, 26(9): 1113-1116
ISTP
- Zhu J.H., Zhang W.H., Coupled Design of Components Layout and Supporting Structures Using Shape and Topology Optimization.CJK-OSM IV 2006, Kunming China, 2011.11.06-09 (ISTP 000244096300002)
- Gao T., Zhang W.H., Zhu J.H., Xu Y.J., Topology optimization of heat conduction problem involving design-dependent effect. CJK-OSM IV 2006, Kunming China, 2011.11.06-09 (ISTP 000244096300050)
- Zhu J.H., Zhang W.H., Evolutionary Topology Optimization with A Replaceable Element of Orthotropic Cellular Microstructure. ICMEM 2005, Nanjing China: 822-827, 2005.10.26-28 (ISTP 000232717800169)
国际会议
- Zhu J.H., Obtaining Ultra-light and High-performance Structures using Topology Optimization and Additive Manufacturing, ECCOMAS Congress 2016, Crete, Greece, 2016.06.05-10
- Zhu J.H., Topology Optimization of Assembled Aircraft Structure with Joint Load Constraints, Multi-physics modeling of solids, ENSTA ParisTech, Paris, France, 2014.10.06-08
- Zhu J.H., Hou J., He F., Zhang W.H., Topology Optimization of Assembled Aircraft Structure with Joint Load Constraints. The Eighth China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems, Gyeongju, Korea, 2014.05.25-29
- Zhu J.H., Li Y., Zhang W.H., Topology Optimization with Shape Preserving Design, ICCM2014, Cambridge, England, 2014.07.28-30
- Zhu J.H., Advanced structure topology and shape optimization of complex structual systems. International Conference of Manufacturing Technology Engineers 2013, Shanghai, China, 2013.10.10-11
- Zhu J.H., Zhang W.H., Advanced structure topology and shape optimization in ESAC group. 4th ASMDO Conference 2012, Xi’an, China, 2012.11.05-09
- Gu X.J. Zhu J.H., Zhang W.H., The lattice structure designfor the stereolithography based investment casting model. 7th CJK-OSM 2012, Huangshan, China, 2012.06.19-21
- Xia L., Zhu J.H., Zhang W.H., Sensitivity analysis with the modified Heaviside function for the optimal layout design of multi-component systems. 7th CJK-OSM 2012, Huangshan, China, 2012.06.19-21
- Zhu J.H., Wang H., Zhang W.H., Light-weight design of aircraft skin stretch-forming die using topology optimization. 5th ACOMEN 2011, Liege, Belgium, 2011.11.14-17
- Zhu J.H., Topology optimization design for the stereolithography based rapid casting pattern, 6th NPU-UTC Workshop on Multidisciplinary Optimzation 2011, XI AN, China, 2011.06.21-22
- Zhu J.H., Topology optimization design for the stereolithography based rapid casting pattern, SFD 2011 Workshop on Composite Materials & Structures, Guangzhou, China, 2011.05.11-13
- Zhu J.H., Zhang W.H., Xia L., Improved Computational Efficiency for Integrated Layout Design. First International Conference on Structural Mechanics Behavior 2010, Sanya, China, 2010.03.29-04.05
- Zhu J.H., Xia L., Zhang Q., Zhang W.H., Improved Computational Efficiency for Integrated Layout Design. ASMDO Conference 2010, Paris, France, 2010.06.21-23
- Zhu J.H., Beckers P., Zhang W.H., Simultaneous layout design of supports and structures systems. WCSMO Conference 2009, Lisbon, Portugal, 2009.06.01-09
- Zhu J.H., Integrated Layout Design of Structures and Its Sub-systems. First Joint French-Dutch-Chinese Workshop on Composites Materials and Structures, 2009, Delft, The Netherlands, 2009.04.21-24
- Zhu J.H., Beckers P. Zhang W.H., On the Multi-component Layout Design with Inertial Force. ACOMEN Conference 2008, Liege, Belgium, 2008.05.26-28
- Zhu J.H., Beckers P., Zhang W.H., Layout design of the multi-component systems with gravity. ASMDO Conference 2008, Gijon, Spain, 2008.09.02-05
- Zhu J.H., Beckers P., Zhang W.H., On the Layout design of Multi-component Systems. International Workshop 2007: Advancements in Design Optimization of Materials, Structures and Mechanical Systems Xi’an, China 2007.12.17-20
- Beckers P., Zhu J.H., Zhang W.H., Optimal Design of Complex Multi-component Layout. WCSMO2007, Seoul, Korea, 2007.05.21-25
- Zhu J.H., Zhang W.H., Beckers P., Complex System Design with Multi-component Layout Optimization. ASMDO Conference 2007, Besançon France, 2007.04.17-20
- Zhang W.H., Zhu J.H., A new finite-circle family method for optimal multi-component packing design. WCCM VII 2006, Los Angeles, United States, 2006.06.16-22
- Zhu J.H., Zhang W.H., Structural topology optimization with evolutionary methods.Intensive Seminar 2005: Optimal design of structures and materials, Xi’an China, 2005.12.07-09
国内会议
- 朱继宏, Integrated layout and topology optimization design for complicated structure systems, 中国力学大会 CCTAM 2016 8.13-16, 北京
- 朱继宏, 张卫红, 整体结构优化设计, 中国计算力学大会 CCCM 2016 10.16-20
- 朱继宏, 郭文杰, 张卫红, 多组件结构系统的整体式拓扑布局优化设计进展, 中国力学学术大会 CCTAM 2015 8.15-18, 上海
- 朱继宏, 李昱, 张卫红, Structural Topology Optimization for Local Shape Preserving Design, 中国力学学术大会 CCTAM 2015 8.15-18, 上海
- 朱继宏, 李昱, 张卫红, 考虑区域保形的结构拓扑优化设计, 中国计算力学大会, 2014, 08.10-13, 贵州贵阳
- 谷小军, 朱继宏, 张卫红, The novel lattice structure design for the SL investment casting patterns, 中国力学学术大会 CCTAM 2013 8.19-21 陕西西安
- 张卫红, 朱继宏, 夏凉, Overview of the integrated layout design of multi-component systems, 中国力学学术大会 CCTAM 2013 8.19-21 陕西西安
- 张桥, 张卫红, 朱继宏, 动响应拓扑优化设计改进, 第十届全国振动理论及应用大会, 2011, 10.27-29, 江苏南京
- 张卫红, 朱继宏, 轻质结构优化设计方法研究新进展, 中国力学大会 CCTAM 2011, 8.22-24 黑龙江哈尔滨
- 谷小军, 朱继宏, 张卫红, 基于快速精铸的树脂原型内腔构型优化设计, 中国力学大会 CCTAM 2011, 8.22-24 黑龙江哈尔滨
- 王丹, 张卫红, 朱继宏, 张苗苗, 开口薄壁曲壳结构上的孔型屈曲优化设计, 中国力学大会 CCTAM 2011, 8.22-24 黑龙江哈尔滨
- 夏凉, 朱继宏, 张卫红, 基于Heaviside函数灵敏度分析的多组件系统布局优化设计, 中国力学大会 CCTAM 2011, 8.22-24 黑龙江哈尔滨
- 张进, 张卫红, 朱继宏, 夏凉, 拓展有限元法在组件协同布局优化中的应用, 中国力学大会 CCTAM 2011, 8.22-24 黑龙江哈尔滨
- 谷小军, 朱继宏, 张卫红, 面向快速精铸的SL原型内腔构型优化设计, 第五届全国快速成型与制造学术会议 2011, 5.16-18 陕西西安
- 夏凉, 朱继宏, 张卫红, 提高组件系统布局协同优化设计效率的新策略, 中国第二届计算力学会议 2010, 8.21-23 四川绵阳
- 张桥, 张卫红, 朱继宏, 静力载荷和随机激励下结构拓扑优化设计, 中国第二届计算力学会议 2010, 8.21-23 四川绵阳
- 朱继宏, 张卫红, 多组件系统的综合布局优化设计, 中国力学大会 CCTAM 2009, 8.24-26 河南郑州
- 朱继宏, 张卫红, 多组件结构系统布局优化设计, 中国工程物理研究院第五届学术年会 2009 8.19-21 四川绵阳
- 朱继宏, 张卫红, 复杂多元件系统的布局优化, 中国力学学术大会 CCTAM 2007, 8.20-22 北京
- 张卫红, 朱继宏, 结构拓扑优化技术的进展与实践, 中国科学院技术科学论坛第二十三次学术报告会议(CAE自主创新发展战略) 2006 北京
- 朱继宏, 张卫红, 基于渐进技术的单元替换拓扑优化方法, 中国力学大会 CCTAM 2005, 8.25-28 北京
专利
- 朱继宏, 张卫红, 张桥 多组件结构系统布局优化设计方法 授权号ZL 2009 1 0218668.2 申请20091029 授权 20110615
- 朱继宏, 谷小军, 张卫红, 李军朔, 夏凉 等效拓扑优化中设计相关性载荷的方法 授权号ZL 2011 1 0005152.7 申请20110112 授权 20120801
- 谷小军, 朱继宏, 侯杰, 张卫红, 王丹 考虑拔模制造约束的拓扑优化设计方法 授权号ZL 2012 10071248.8 申请20120317 授权20130806
- 谷小军, 刘虎, 朱继宏, 张卫红, 孟亮 基于伪密度排序并考虑拔模制造约束的拓扑优化设计方法 授权号ZL2012 10071247.3 申请20120317 授权20140820
- 朱继宏, 侯杰, 谷小军, 高欢欢, 李军朔, 张卫红 基于密度阈值的结构拓扑优化设计灵敏度过滤方法 授权号ZL2012 10268937.8 申请20120731 授权20140716
- 朱继宏, 高欢欢, 谷小军, 侯杰, 李军朔, 张卫红 基于周长阈值的结构拓扑优化设计灵敏度过滤方法 授权号ZL2012 10270549.3 申请20120731 授权20141231
- 朱继宏, 谷小军, 张卫红, 李军朔 快速精铸树脂原型内腔设计方法 申请号201120154979.4 申请20110609
- 谷小军, 朱继宏, 高欢欢, 张卫红, 李军朔 基于几何背景网格并考虑拔模制造约束的拓扑优化设计方法 授权号 ZL2012 10071062.2 申请20120317 授权20141105
- 谷小军, 朱继宏, 孟亮, 张亚辉, 舒毅潇, 张卫红 基于附加单元的固体重量压力载荷下的拓扑优化设计方法 授权号 ZL2013 10143554.2 申请20130424 授权 20160120
- 谷小军, 朱继宏, 高欢欢, 李清, 张亚辉, 张卫红 基于约束方程的固体重量压力载荷下的拓扑优化设计方法 授权号ZL2013 10143269.0 申请20130423 授权 20151021
- 张卫红, 谷小军, 周莹, 侯杰, 刘虎, 朱继宏 循环对称圆柱网格结构拓扑优化设计方法 申请号201310143035.6 申请 20130423
- 张卫红, 孟亮, 牛草, 谷小军, 朱继宏 基于超椭圆曲线的带辐板涡轮盘内腔形状优化设计方法 授权号 ZL2013 10210947.0 申请 20130530 授权 20160120
- 侯杰, 谷小军, 高欢欢, 周莹, 朱继宏, 张卫红 考虑钉载的机翼翼梁结构拓扑优化设计方法 授权号 ZL2013 10283153.7 申请 20130705 授权 20160120
- 谷小军, 朱继宏, 张卫红, 孟亮, 周莹 基于多弧段曲线的压力载荷下的结构拓扑-形状联合优化方法 授权号 ZL2013 10340431.8 申请20130806 授权20160608
- 谷小军, 朱继宏, 李昱, 张卫红, 周莹 基于多点位移协调约束的多组件结构系统布局优化设计方法 授权号 ZL2013 10340432.2 申请20130806 授权20160608
- 谷小军, 朱继宏, 李昱, 张卫红, 张亚辉 基于多点位移协调约束的结构拓扑优化方法 申请号 201310340064.1 申请20130806
- 朱继宏 , 高欢欢, 张卫红, 谷小军 基于多点约束的多组件结构系统布局优化设计方法 授权号 ZL2013 10376821.0 申请20130827 授权20160224
- 张卫红, 侯杰, 朱继宏 基于应力约束的机翼翼梁结构拓扑优化方法 授权号 ZL2013 10378855.3 申请201308 授权20160608
- 朱继宏, 李清, 谷小军, 张亚辉, 侯杰, 高欢欢, 张卫红 快速精铸树脂原型内腔尺寸优化设计方法 授权号ZL2013 10379365.5 申请20130827 授权20160907
- 李昱, 朱继宏, 张卫红, 王林 基于保形约束的悬臂梁结构拓扑优化设计方法 申请号201510172114.9 申请 20150413
软件
- 朱继宏, 张卫红, 杨军刚, 张进, 通用优化设计平台软件系统 1.0 完成20091201 登记号2010SR043556
- 朱继宏, 张卫红, 谷小军, 快速铸造模型空腔微结构系统 1.0 完成20100601 登记号2010SR069231
- 朱继宏, 张卫红, 李军朔, 快速铸造模型空腔微结构系统 2.0 完成20110617 登记号2011SR051607
- 朱继宏, 谷小军, 张卫红, 快速精铸树脂原型内腔设计与精度控制系统 1.0 完成20110620 登记号2012SR042412
- 朱继宏, 孟亮, 张卫红, 多弧段形状优化设计系统 1.0 完成 20130101 登记号 2013SR054455
- 朱继宏, 侯杰, 张卫红, 考虑钉载的梁结构优化系统 1.0 完成 20130301 登记号 2013SR069660
- 本工作获得了国家重点研发计划(2017YFB1102800)、国家自然科学基金优秀青年科学基金(11722219)、国家自然科学基金重点基金(51790171、5171101743、51735005、11620101002、11432011),在此一并表示感谢。
- This work is supported by National Key Research and Development Program (2017YFB1102800), NSFC for Excellent Young Scholars (11722219), Key Project of NSFC (51790171, 5171101743, 51735005, 11620101002, 11432011).
- 支撑单位:
航宇材料结构一体化设计与增材制造装备技术国际联合研究中心,机电学院
State IJR Center of Aerospace Design and Additive Manufacturing, School of Mechanical Engineering
金属高性能增材制造与创新设计工信部重点实验室,西北工业大学-伦敦玛丽女王大学先进材料结构联合研究院
MIIT Lab of Metal Additive Manufacturing and Innovative Design, NPU-QMUL Joint Research Institute (of Advance Materials & Structures)
无人系统技术研究院-智能材料与结构研究所
Institute of intelligence material and structure, Unmanned system technologies
陕西省飞行器结构优化与应用工程实验室
Shaanxi Engineering Laboratory of Aerospace Structure Design and Application